29 Ipswich Road
Woolloongabba, QLD, 4102
Australia
+61 7 3391 1088
Rod Holders
$65

        BAIT CASTER SWIVEL MOUNT ROD HOLDER (INSTALLED INCLUDING FITTINGS)   

This rod holder can easily adjust a rod from 5º - 95°. The base design has twelve variable positions to allow the rod to rotate through 360°. Thumb activated, slide locking ring retains the rod when trolling. Supplied with a side mount bracket with channel to allow mounting on rails up to 25mm diameter (optional rail mount adaptor). Various additional mounts can be ordered separately and are listed below. Rod holder and mount kits are all moulded in tough polyethylene.

Mount base 82 x 55mm, can be fitted to vertical or horizontal surfaces (horizontal requires adaptor).

All instalation Included as well as 316 marine stainless fittings inc nylock nuts and appropriate bolts an washers. installations to kayaks and canoes only. 

ADAPTORS (please Enquire)

Side Mount
Mounts on vertical surface. Moulded channel in base for mounting on tubular rails to 25mm diameter using rail mount adaptor below.

Rail Mount Adaptor
Converts side mount to rail mount. Fastenings purchased separately.

Flush Deck Mount
Mounts on horizontal surface.


WHY DO I NEED A ROD HOLDER?

Rod holders are an integral part of a fishing boats setup, and for very good reason.  The most obvious use is for trolling.  A rod holder can be a godsend during long days on the water, and also during nasty and extreme weather. 

 

Utilizing a rod holder will allow you to be more attentive to electronics and the operation of the boat, without the fuss of physically holding the rod, essentially limiting the use of one of the extremities. 

 

Not only that, but the device will help in keeping you alert and fatigue-free - a common ailment for those unlucky enough to troll with a rod in their palm for hours upon hours. 

<<--Return
© ROSCO CANOES AND KAYAKS | HOME | SITEMAP | CONTACT